 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Stick Coupler HD-02103AST Series sFeatures 1.High Performance Low insertion loss: 0.1 dB max. (Typical) 2.High Power Handling 200 W max. power handling capability. Efficient heat dissipation characteristic. 3.Extremely Small Size and Lightweight Innovative Hirose Electric design of the case and cover is behind the extremely small size and lightweight. 4.Simple installation Standard screw mounting and solder tabs allows direct mounting to planar circuits. sSpecifications Ratings Frequency range Characteristic impedance Maximum Input Power 1800 ~ 2200 MHz 50 ohms 200 W Operating temperate range Operating relative humidity 0c to +80c 95% Max. Note: The frequency range and the maximum input power will differ depending on the products. Characteristic 1.Insulation resistance 1000M ohms Min. 2.Vibration 3.Shock 4.Temperature cycle 5.High temperature exposure 6.Low temperature exposure Requirement DC 250V Conditions Frequency of 10 to 2000 Hz, overall amplitude of 1.52 mm, No electrical discontinuity of 1 s or more No damage, cracks, or parts dislocation acceleration of 98 m/s2 for 2 hours in each of 3 directions Acceleration of 490 m/s2, sine half-wave waveform, 3 cycles in each of the 3 axis Temperature: -55c+5c to +35c+85c+5c to +35c Time: 305 max.305 max. (Minutes)100 cycles 96 hours at 85c 96 hours at -55c Exposed to 20% salt water solution for 48 hours 96 hours in 10 ppm concentration No damage, cracks, or parts dislocation 7.Corrosion resistance No serious corrosion 8.Sulfur dioxide gas No damage, cracks, or parts dislocation qThe test methods conform to MIL-STD-202. sMaterial Component Cover Case Board Tabs Material Aluminum Brass Dielectric Phosphor bronze Finish --------- Nickel Plated Gold plated Gold plated 24 sSpecifications Part Number Frequency Range (GHz) 1.8~2.2 Coupling (dB) Frequency Sensitivity (dB) 0.3 IsoIation (dB Min) V.S.W.R. (Max) Weight (g) Power (W) Fig. HD-02103AST 3+0.15 0 23 1.2 2 200 1 sDimensions (37.3) 3.050.35 20.55 6.650.4 31.20.35 240.4 (3.05) (6.65) (2.57) 4.80.35 (8.8) 20.55 2-O2.70.3 Through hole 4-(1.2) (2.3) sPCB Mounting Pattern 2-M2.30.4 (3.62) 31.20.1 sMounting Sequence Step 1. Phillips head driver-Max torque of 14.7N Step 2. Tab soldering M2.3x0.4 (Not supplied) Mounting surface groove Soldering areas 25 sTypical Data 1.2 2.5 Output / Coupling(dB) 3 3.5 Coupling 25 Isolation 35 1.05 40 1.8 2.0 Frequency(GHz) 2.2 1.0 1.8 Secondary Line 2.0 2.2 Output 20 Isolation(dB) VSWR 1.15 1.1 Primary Line s200 W Power Test Test fixture Thermal resistance value [Thermal resistance value : 9.0c/W] 120 Cover 100 Temperature(c) 80 60 40 20 1.2 Termination High Power AMP (f=2.155Hz) 0 50 100 150 177 Temperature inside test tank Frequency : 2.155GHz Fixture Fixture pattern Test Circuit Vector Network Analyzer (f=2.155GHz) HD-02103AST Test jig Termination Power meter Termination 26 |
Price & Availability of HD-02103AST
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |